You’ll be delighted to know that, as promised (this time), we finally took photos of Marcy’s dining set. And so here’s the story:
We know from the post about her china cabinet that Marcy has a gray/Navy thing going on in her dining room… with a pop of red as an accent color.
Marcy had this quaint and lovely dining set. It seems small-ish, but there are 3 leaves… making this thing a bit monstrous when it’s all assembled.
She wanted us to use the same gray/glaze finish we used on the china cabinet for the table legs and chairs, only sand/stain the top surface a dark DARK stain. We begun by taking the belt sander to the top to remove the glossy finish and existing stain.
BUT we learnt quickly that this wouldn’t do. The sandpaper kept getting caked up, and because it was a veneer, we worried the belt sander would sand too deep. So we aquired some Zinsser Strip Fast Paint and Varnish stripper. We have no experience with this product, and weren’t excited at the thought of using Marcy’s dining table as a guinea pig, but we didn’t really have a choice.
The stuff was messy, smelly, and globby… but it got the job done. If you know a better product to use, we’re open to suggestions.
Once we had finished with the nasty stuff, we still had a significant amount of sanding to do, especially on the edges where the varnish remover didn’t get.
FINALLY, we had finished sanding and were left with this beautiful raw wood that we worked so hard for!
Next, naturally, we slapped on some Minwax Ebony stain, and let ‘er sit for quite awhile. Marcy wanted it DARK!
And after wiping away with a clean dry cloth, we were left with this rich amazing finish. HELLO.
Now that we had finished the table top, we flipped it over and taped off along the edge so that we could paint that little ledge without getting any on our new stained surface.
This area, as well as the legs and chairs got primed with Kilz and painted Glidden Seal Gray (just like the china cabinet).
Then we glazed everything that was gray (glazing tutorial here). We used a black/brown mixture of paint in our glaze.
All that remained was to poly everything down to seal it real good and make it uber durable YO. Marcy wanted a matte surface (which I totally dig), and even hunted down some FLAT Poly for us! YES! They make FLAT POLY! It’s by Rustoleum. And she found it at Lowe’s if you’re wondering.
Using the same technique as I did on our own dining chairs, I upholstered the chair cushions using this fabric Marcy had chosen (and applied the same clear plastic to make them kid-proof!).
You better believe we took final pics of this bad boy outside in the yard. We weren’t about to clear out our dining room just to set this up for pictures! Plus, what could be a better backdrop than Mother Nature herself!
We hope it’s just what Marcy had in mind!
If you have any questions at all about our process or the products we used, we’ll be happy to answer questions in the comment section!